Wipers (wipers) are sometimes small in an inconspicuous, but at the same time important element for any vehicle.
Largely thanks to the janitors, the car owner has the opportunity to move on his car in any weather conditions even with rain or snow.
Rubber tapes installed on wipers are able to effectively execute their purpose for only 6 months.
Когда этот срок пройдет вам нужно осуществить замену щётки дворника, или резиновой ленты.
In both cases, the brush must be removed from the wiper lever. With any motorist, this operation can be done quite independently, because it is not such a difficult task to remove the wipers as it seems at first.
For a simple removal of the brush wiper to change the rubber tape from the wiper lever, you just need to throw the wiper lever upward, with an extending down the plastic lock located in the axis in the middle of the brush. Having squeezed the latch, you need to use a light movement to pull off the brush from the lever to replace it with a new one, or replace the rubber tape in the old brush. To change the rubber tape, it is necessary to extend the fasteners on one of the sides of the brush, then remove the rubber tape, which was worn out, then install metal locks on a new. Make sure that the bend is directed strictly down to the glass. Next, you can install a new rubber tape in the brush, then squeeze it using fasteners.
If the glass cleaner mechanism is faulty, and the replacement is not necessary, but a lever, you will need to dismantle the wipers entirely. For this purpose, open the hood of the vehicle and find there a black protective cap located in front on the axis of the lever. You need to gently submit it to remove it. There is a hexagonal nut under the cap that needs to be turned to remove the puck. The lever installed in the shallow connection on the glass of the wiper is removed by a sharp movement.
In the process of installing it, the leverage of the wipers must be screwed so that the location of the left lever is about 6 centimeters from the lower part of the windshield. To install the right lever, it is necessary that it reaches the lower marking available on the surface of the windshield. Work related to the installation of wipers is carried out after the engine of the wipers is installed in the starting position.
Share on social networks:
.